Tile skirting boards are simply skirting boards that are made up entirely of tile. They can add character to your room with an existing tile floor in place, and unlike wood baseboards that need to be nailed in place and painted or varnished for their final finish; Tile baseboards are simply glued to the foot of the wall.

To get a good size and design for your tile baseboards, the easiest way is to use tiles exactly the same as the ones you laid out earlier, so if you decide to do this, buy enough to cover the perimeter of your wall in the first place. Stages in the preparation of the tile floor. If, for example, you take a 12 “inch floor tile, to get an average 4” inch high baseboard, you simply need to cut the tile into three equal sections.

Because these are straight cuts, using a ceramic tile breaker would be ideal for the job, as long as, of course, it is ceramic tile that you are working with. The other best option would be the electric wet tile saw, but this would certainly take more time to prepare the cuts, as well as giving you wide cuts. If using this method, offset the width of the wet tile saw blade. It will remove anything from an extra 1/16 “to 1/8” inch from the fully cut tile and can cause your pieces to have irregular sizes.

To calculate the number of tiles you need for your baseboards if you are using the same style of tile, simply count the number of tiles you have along each wall, add up the total, and then divide by three to get your number. When mounting them on the wall, be sure to keep the floor grout lines continuous by projecting them up into the tile baseboards. If you do it another way by laying a tile baseboard directly over where a grout line ends, then you have something that will look very strange. Match each tile plinth in line with each tile.

To stick them to the wall, the best thing I can find is a multipurpose construction adhesive known as PL Premium. It costs about $ 5 for an applicator tube suitable for use with cocking guns, and is a fantastic glue to work with that will pretty much stick anything to anything instantly. That includes your fingers, so apply and use with care. This brand may not be available in your region or country, but there will certainly be alternatives and your local hardware store will soon point you in the right direction with tips.

A couple of other options for attaching tile baseboards to a wall are regular silicone reinforcement or ceramic tile adhesive. Regular hammering doesn’t really have good adhesive properties and the tiles may have a tendency to slip. However, premixed ceramic tile adhesive works well with wall covering applications, for which basically tile baseboards really are, but as long as it is never allowed to come in contact with water.

To apply this, simply take a V-notch trowel and “butter” the adhesive over the tile, spreading it evenly and then pinning it in place. However, it can be much more complicated than simply spraying a line of construction adhesive with a cocking gun, but it is still very effective in bonding wall tiles successfully anyway.

Leave a Reply

Your email address will not be published. Required fields are marked *